I flanges 4 more ribs tonight. 2x HRIB1, HRIB2, HRIB3
Both HRIB1 had bubbles under the glass on one side. I sanded and repaired these like on the Spar.
I had done a bubble repair on HRIB3 previously, but I didnt fill the bubble with micro. I sanded out the bubble, cleaned the surface and glassed over the divot. This left an indentation about the size of a nikle. I wasn’t happy with the indenation on the rib and I wasn’t sure of the reduction in strength. Since this repair was already dry, I filled the divot with micro and glasses over the top so the rib, once again had a flat surface.