Night Stands 4

I finished the drawer and got them mounted in the night stand boxes.

I cut two drawer blanks from 4/4 Black Walnut.

And clamped them to the boxes with the drawers in stalled and clamped the blanks in place so I could mark the back sides to be cut.

I trimmed right up to the edge of the line with the finish blade in my bandsaw. And I sanded the edge just enough to get the pencil line to disappear.

I then saned the entire blank down to 180 grit with my random orbit sander and checked the fit in the cabinet.

Leave a Reply

Your email address will not be published. Required fields are marked *